200 L Bain Marie Alembic Still Premium

This is ideal to experiment with fermented fruits or sensible plants.

Premium Model manufactured with:

• Copper pot with double wall;

• Lid with swan neck;

• This model allows the connection of a refining lentil (dephlegmator) between the lid and swan neck, which can be bought separately;

• The condensing recipient is equipped with a water inlet tube located at the bottom of the condensing recipient and an outlet tube at the top where the water exits;

• There are brass locking / unlocking unions between the lid, swan neck pipe and the condensing recipient to avoid the escape of vapours;

• Discharge pipe from the internal chamber;

• Two screw-on brass plugs for the external chamber, one topside for filling up with water and the other near the base for discharging water;

• Pressure release tube for the release of excessive pressure;

• Side handles on the lid for easy and safe removal;

• Fill up the external chamber up to ¾ of its capacity with water, water level should be checked after each distillation to be sure the alembic will not run dry;

• All the Premium units have the identifying Al-Ambiq® plaque;

• Thicker copper sheets that require more manual labour and as a result become handcrafted master pieces;

• We stand out because you can be assured that our products, as well as the materials we use in the manufacturing process are completely safe, tested, certified and lead free;

• These equipments, if treated well, can last an entire lifetime.

Treatment: A first cleaning distillation is essential to clean impurities and other unwanted substances. These substances, which are inherent to copper, are deposited after the still has not been in use for a relatively long period of time;

The lid and pot need to be sealed off to prevent the escape of vapors. This is achieved with a very simple and rudimentary sealing technique;

Detailed information will be available to client after purchase is made;

Wish to read more on distilling?