Glass Liquid Thermometer 0 - 100 °C & Brass Casing Welded to Swan Neck



US$ 32.25

- 5%

US$ 33.94

Quick Overview:

Highly recommended

This thermometer in brass casing is suitable for all alembic models and sizes.

More details

Quantity :

Recommended for the distillation of spirits. For essential oils and hydrosols please refer to item 4805.This thermometer is placed in a brass casing which is soldered to the swan neck piping just before the curvature starts and where the vapours start to descend into the condensing coil. It is located at the highest point of the vapour passage, before this point many less volatile vapours have fallen back into the pot. It will guarantee users a continuous accurate temperature reading during distillation.

Visible temperature reading on the blue alcohol -Mercury Free- thermometer ranges from 40º to 110ºC, with only a 1º maximum error probability on its total scale. Should you wish to measure temperatures reading in the vapour chamber (lid) please refer to 4806.

Please note: Thermometer should be purchased at the same time as the still , and will be delivered via regular postal mail if ordered on its own. Please allow a few days for the thermometer to be soldered on to the alembic.

    Weight0.2 kg
    Height x Length x Width (mm)110 mm x 30 mm x 10 mm
    Temperature Range0 - 110 ºC
    Casing Angle135º
    More informationInterior Fluid: Blue Alcohol (Mercury Free) and Maximum Error: 1º (total scale)
    DimensionsGlass Rod Thermometer Dimensions - 90mm