- Products
-
- Decorative Alembic & Alquitar Stills
- Small Distilling Unit Stills
- Spirits Distillation DIY Kits
- Essential Oil & Hydrosol Distillation Kits
- Starter Kit Copper Alembic Stills
- Distilling Appliance Stills
- Soldered Copper Moonshine Alembic Stills
- Split Top Rotating Column Copper Alembic Stills
- Distilling Accessories & Enology Instrumentsaddremove
- Professional Copper Distillery Systems
- Kitchenware & Cookwareaddremove
- Traditional Riveted Alembic Stills
- Traditional Alquitar Distiller Stills
- Traditional Whiskey Copper Alembic Stills
- Cask Hood Copper Pot Stills
- Bain Marie Copper Alembic Stills
- Charentais Copper Alembic Stills
- Water Sealing Copper Alembic Still Systems
- Reflux Column & Soldered Moonshine Copper Alembic Still Sets
- Fermentation & Distillation Supplies
- Oak Barrels & Derivativesaddremove
- Gift Certificates
- Metal Cleaner
30 L Copper Still Bain Marie Pot Prime Kit
1,036.97 €
985.12 €
- 5%1,036.97 €
The 30 L Bain Marie Alembic Still Prime Kit was designed to get anyone started in the world of distillation. This copper still has all the features needed to experiment with different recipes. It will allow you to begin this amazing journey and produce any spirits.
72310_sp
New product
Calculate Shipping Cost
Shipping:
Free Shipping
0Tax excl.
0Tax excl.
to
Portugal
via
Worldwide Economy
Prime Kit contains:
This is ideal to experiment with fermented fruits or sensible plants.
Premium Model manufactured with:
- Copper pot with double wall;
- Lid with swan neck;
- This model allows the connection of a refining lentil (dephlegmator) between the lid and swan neck, which can be bought separately;
- The condensing recipient is equipped with a water inlet tube located at the bottom of the condensing recipient and an outlet tube at the top where the water exits;
- There are brass locking / unlocking unions between the lid, swan neck pipe and the condensing recipient to avoid the escape of vapours;
- Discharge pipe from the internal chamber;
- Two screw-on brass plugs for the external chamber, one topside for filling up with water and the other near the base for discharging water;
- Pressure release tube for the release of excessive pressure;
- Side handles on the lid for easy and safe removal;
- Fill up the external chamber up to ¾ of its capacity with water, water level should be checked after each distillation to be sure the alembic will not run dry;
- All the Premium units have the identifying Al-Ambiq® plaque;
- Thicker copper sheets that require more manual labour and as a result become handcrafted master pieces;
- We stand out because you can be assured that our products, as well as the materials we use in the manufacturing process are completely safe, tested, certified and lead free;
- These equipments, if treated well, can last an entire lifetime.
Treatment: A first cleaning distillation is essential to clean impurities and other unwanted substances. These substances, which are inherent to copper, are deposited after the still has not been in use for a relatively long period of time;
The lid and pot need to be sealed off to prevent the escape of vapors. This is achieved with a very simple and rudimentary sealing technique;
Detailed information will be available to client after purchase is made;
Wish to read more on distilling?
- Capacity
- 30 L
- Unions
- Soldered
- Thickness
- 1.1 mm
- Varnish Treatment
- No
- Material
- Copper & Brass Handles
- Weight
- 24.5 kg
- Height x Length x Width (mm)
- 1000 mm x 1150 mm x 560 mm
Related products
On Top